USD
New 7d carving poly lati ultrasonic anti-aging machine face lifting and tightening 7d hifu machine
Working PrincipleWith 7 different cartridges, High Intensity Focused Ultrasound accurately delivers heat energy to deep skin layers of different depths to stimulate collagen regeneration to increase skin elasticity, improve skin texture and reduce sagging skin, achieving the results of wrinkle removal, skin lifting and tightening, etc. for both face and body. It can also target subcutaneous tissues to selectively destroy localized fat cells beneath the surface skin layer without harming surrounding tissues meanwhile promoting skin metabolism and blood circulation, so as to realize the effects of body slimming, abdomen firming, buttock and breast lifting, etc.
Working Principle
Function
1) Removing wrinkles on around forehead, eyes, mouth, etc
2) Lifting and tightening both cheeks skin.
3) Improving skin elasticity and shaping contour.
4) Improving jaw line, reducing "marionette lines".
5) Tightening the skin tissue on forehead, lifting the eyebrows lines.
6) Improving skin complexion, making the skin delicate and bright.
7) Removing neck wrinkles, protecting neck aging. 8) Weight loss.
1) Removing wrinkles on around forehead, eyes, mouth, etc
2) Lifting and tightening both cheeks skin.
3) Improving skin elasticity and shaping contour.
4) Improving jaw line, reducing "marionette lines".
5) Tightening the skin tissue on forehead, lifting the eyebrows lines.
6) Improving skin complexion, making the skin delicate and bright.
7) Removing neck wrinkles, protecting neck aging.
8) Weight loss.
Installation
1. Find the 2 screw holes on the left side of the host;
2. Align the accessory rack with the holes and tighten the screws (2 on each side);3. Install the accessory rack on the right completely;
3. Precautions
4. If you do not disassemble the display screen when moving the instrument, please check whether the screws are tightened before and after moving the instrument to prevent the display from falling to the ground due to loose screws
1. Find the 2 screw holes on the left side of the host;
2. Align the accessory rack with the holes and tighten the screws (2 on each side);3. Install the accessory rack on the right completely;
3. Precautions
4. If you do not disassemble the display screen when moving the instrument, please check whether the screws are tightened before and after moving the instrument to prevent the display from falling to the ground due to loose screws
Operating interface
1. Current used number of posts. Remain The remaining number of posts.
2. Information of installed probe
3. The depth, wavelength, and distance of the installed probe are displayed (display only)
4. Set the distance between thermal condensation points.
5. Set the energy length (5mm-25mm, the minimum adjustment interval is 5mm.)
6. M1, M2 save parameters. (Long press for 3 seconds to save.)
7. Energy regulation.
8. Repeat is continuous transmission mode Single is single transmission mode
9. Settings
10. Send number information
11. System status "standby" and "start“
12. Set the limit of the number of transmissions and beep
13. the total number of sent
ECHNICAL PARAMETERS
What is 7D Focused Ultrasound？
1. Current used number of posts. Remain The remaining number of posts.
2. Information of installed probe
3. The depth, wavelength, and distance of the installed probe are displayed (display only)
4. Set the distance between thermal condensation points.
5. Set the energy length (5mm-25mm, the minimum adjustment interval is 5mm.)
6. M1, M2 save parameters. (Long press for 3 seconds to save.)
7. Energy regulation.
8. Repeat is continuous transmission mode Single is single transmission mode
9. Settings
10. Send number information
11. System status "standby" and "start“
12. Set the limit of the number of transmissions and beep
13. the total number of sent
ECHNICAL PARAMETERS
MMFU(Macro &Micro Focused Ultrasound) : “"Macro & Micro High Intensity Focused Ultrasound System" Non-Surgical Treatment Of Face Lifting, Body Firming And Body Contouring System!
